AJA OG-4K2HD openGear 4K/UltraHD-SDI to 3G-SDI Down-Converter with DashBoard support
End of sale 2.12.2022 (EOL)OG-4K2HD is an openGeard card that down-converts professional 3G-SDI 4K/UltraHD signals to HD resolution using AJA’s high-quality scaling for cost-effective monitoring and conversion. OG-4K2HD’s HD-SDI and HDMI outputs are live simultaneously, producing fantastic-looking HD images for on set monitoring or direct-to-air broadcast.
OG-4K2HD supports high frame rate (HFR) 4K/UltraHD inputs at 50 and 60fps and converts to HD outputs at 50 and 60fps for accurate viewing. OG-4K2HD’s configuration options allow extraction of an HD resolution image from the 4K input to provide a one-to-one pixel image for 4K focus checks on HD displays.
Designed for use in high-density openGear’s 2RU frames including AJA’s OG-3-FR 2RU frame, new DashBoard Software support on Windows®, macOS® and Linux® offers remote control and monitoring of the openGear architecture and provides convenient and industry-standard configuration, monitoring and control options over a PC or local network.
Features
• openGear compatible card
• 4K (4096×2160) and UltraHD (3840×2160) support
• Downconversion for supporting 4K on HD-SDI and HDMI devices
• Simultaneous HD-SDI and HDMI output
• Controlled by DashBoard network control software
• Aspect ratio conversion from full 4K to HD
• Supports up to 4K/UltraHD 50/60fps high-framerate input formats
• Use with openGear 2RU frames including AJA’s OG-3-FR frame
• Five year warranty
Real time downconversion
OG-4K2HD uses real time processing and AJA’s high-quality scaling algorithms to downconvert professional 4K or UltraHD signals using 4× SDI connections to HD resolution, producing fantastic-looking HD images for on set monitoring or direct-to-air broadcast.
Simultaneous HD-SDI and HDMI outputs
OG-4K2HD’s HD-SDI and HDMI outputs are live all the time, allowing use of both professional SDI monitors as well as low-cost HDMI monitors simultaneously. No matter what monitors you have on hand, OG-4K2HD can use them for on the spot 4K viewing.
High frame rate support
Many 4K productions are opting for higher frame rates of 50 and 60fps. OG-4K2HD supports high frame rate (HFR) 4K inputs and converts the HD output to a matching frame rate for accurate viewing so what you shoot is what you see.
Center-cut extraction
OG-4K2HD can be configured to extract an HD resolution center cut from the 4K input. This provides a one-to-one pixel image that can be used to check focus on 4K shoots without the need for a full 4K monitor.
Flexible I/O
The modular rear panel allows custom I/O connections per card (included with individual cards).
Failsafe
The optional redundant power supply provides a secondary power source in the event of a primary power failure.
Ethernet Access
A standard Ethernet connection allows the frame to be accessed via the Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.
End of sale 2.12.2022 (EOL)
OG-4K2HD is an openGeard card that down-converts professional 3G-SDI 4K/UltraHD signals to HD resolution using AJA’s high-quality scaling for cost-effective monitoring and conversion. OG-4K2HD’s HD-SDI and HDMI outputs are live simultaneously, producing fantastic-looking HD images for on set monitoring or direct-to-air broadcast.
OG-4K2HD supports high frame rate (HFR) 4K/UltraHD inputs at 50 and 60fps and converts to HD outputs at 50 and 60fps for accurate viewing. OG-4K2HD’s configuration options allow extraction of an HD resolution image from the 4K input to provide a one-to-one pixel image for 4K focus checks on HD displays.
Designed for use in high-density openGear’s 2RU frames including AJA’s OG-3-FR 2RU frame, new DashBoard Software support on Windows®, macOS® and Linux® offers remote control and monitoring of the openGear architecture and provides convenient and industry-standard configuration, monitoring and control options over a PC or local network.
Features
• openGear compatible card
• 4K (4096×2160) and UltraHD (3840×2160) support
• Downconversion for supporting 4K on HD-SDI and HDMI devices
• Simultaneous HD-SDI and HDMI output
• Controlled by DashBoard network control software
• Aspect ratio conversion from full 4K to HD
• Supports up to 4K/UltraHD 50/60fps high-framerate input formats
• Use with openGear 2RU frames including AJA’s OG-3-FR frame
• Five year warranty
Real time downconversion
OG-4K2HD uses real time processing and AJA’s high-quality scaling algorithms to downconvert professional 4K or UltraHD signals using 4× SDI connections to HD resolution, producing fantastic-looking HD images for on set monitoring or direct-to-air broadcast.
Simultaneous HD-SDI and HDMI outputs
OG-4K2HD’s HD-SDI and HDMI outputs are live all the time, allowing use of both professional SDI monitors as well as low-cost HDMI monitors simultaneously. No matter what monitors you have on hand, OG-4K2HD can use them for on the spot 4K viewing.
High frame rate support
Many 4K productions are opting for higher frame rates of 50 and 60fps. OG-4K2HD supports high frame rate (HFR) 4K inputs and converts the HD output to a matching frame rate for accurate viewing so what you shoot is what you see.
Center-cut extraction
OG-4K2HD can be configured to extract an HD resolution center cut from the 4K input. This provides a one-to-one pixel image that can be used to check focus on 4K shoots without the need for a full 4K monitor.
Flexible I/O
The modular rear panel allows custom I/O connections per card (included with individual cards).
Failsafe
The optional redundant power supply provides a secondary power source in the event of a primary power failure.
Ethernet Access
A standard Ethernet connection allows the frame to be accessed via the Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.
OG-4K2HD supports high frame rate (HFR) 4K/UltraHD inputs at 50 and 60fps and converts to HD outputs at 50 and 60fps for accurate viewing. OG-4K2HD’s configuration options allow extraction of an HD resolution image from the 4K input to provide a one-to-one pixel image for 4K focus checks on HD displays.
Designed for use in high-density openGear’s 2RU frames including AJA’s OG-3-FR 2RU frame, new DashBoard Software support on Windows®, macOS® and Linux® offers remote control and monitoring of the openGear architecture and provides convenient and industry-standard configuration, monitoring and control options over a PC or local network.
Features
• openGear compatible card
• 4K (4096×2160) and UltraHD (3840×2160) support
• Downconversion for supporting 4K on HD-SDI and HDMI devices
• Simultaneous HD-SDI and HDMI output
• Controlled by DashBoard network control software
• Aspect ratio conversion from full 4K to HD
• Supports up to 4K/UltraHD 50/60fps high-framerate input formats
• Use with openGear 2RU frames including AJA’s OG-3-FR frame
• Five year warranty
Real time downconversion
OG-4K2HD uses real time processing and AJA’s high-quality scaling algorithms to downconvert professional 4K or UltraHD signals using 4× SDI connections to HD resolution, producing fantastic-looking HD images for on set monitoring or direct-to-air broadcast.
Simultaneous HD-SDI and HDMI outputs
OG-4K2HD’s HD-SDI and HDMI outputs are live all the time, allowing use of both professional SDI monitors as well as low-cost HDMI monitors simultaneously. No matter what monitors you have on hand, OG-4K2HD can use them for on the spot 4K viewing.
High frame rate support
Many 4K productions are opting for higher frame rates of 50 and 60fps. OG-4K2HD supports high frame rate (HFR) 4K inputs and converts the HD output to a matching frame rate for accurate viewing so what you shoot is what you see.
Center-cut extraction
OG-4K2HD can be configured to extract an HD resolution center cut from the 4K input. This provides a one-to-one pixel image that can be used to check focus on 4K shoots without the need for a full 4K monitor.
Flexible I/O
The modular rear panel allows custom I/O connections per card (included with individual cards).
Failsafe
The optional redundant power supply provides a secondary power source in the event of a primary power failure.
Ethernet Access
A standard Ethernet connection allows the frame to be accessed via the Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.
Die Ware ist
original verpackt und wird mit Rechnung und ausgewiesener
Mehrwertsteuer versendet. Diese Hardware ist Umtausch- und
Rückgaberecht ausgeschlossen. Dieses Angebot richtet sich ausschließlich an gewerbliche Käufer.
